High-performance products that make it easy
to keep a motorcycle in optimal condition,
riders to safely do what they love: Ride!
This product is a unique all-purpose cleaner made with biodegradable materials. Fast-acting cleaning agents lift away dirt while scrubbing grime and oil-based deposits. Specially engineered surfactants lower surface tension, allowing better penetration. This formula leaves a great finish and is safe for use on most surfaces*, including paint, plastic, as well as seals and pads—basically all over the bike!
*Always test on inconspicuous area before use.
WD-40 Specialist Motorcycle Total Wash 33.8 oz 12 CT, UPC - 0 79567 30030 4
First rinse bike then spray on Total Wash, undiluted, and leave for 2-5 minutes. Work any tough areas with a soft brush and rinse off with clean water. Do not allow Total Wash to dry before rinsing. For best results apply WD-40® Specialist® Motorcycle Total Shine.
33.8 oz Motorcycle Total Wash
This product is easy to use. Its foamy formula quickly removes grease, grime, dirt and oil from chains, swingarms and drivetrains. Helps equipment run smoother, last longer and look like new!
WD-40 Specialist Motorcycle Chain Cleaner 18 oz 6 CT, UPC - 0 79567 30029 8
Shake can well. Apply to chain, swingarm and drivetrain and work any tough areas with a brush if necessary. Allow to penetrate for several minutes and then wipe or hose off with water. Do not spray on hot or running engines. Do not contact battery terminals or starter solenoid with can. For best results apply WD-40® Specialist® Motorcycle Chain Lube or Chain Lube.
18 oz Motorcycle Chain Cleaner
Chain Lube is a high-performance power spray lubricant for use exclusively on chain-driven vehicles. Formulated with heavy-duty anti-wear and extreme-pressure additives that provide superior lubrication for all chains. Chain Lube reduces chain stretch and chain wear. By reducing friction, Chain Lube increases horsepower to the rear wheel and reduces chain “noise.” The synthetic base repels moisture and protects chains from rust and corrosion. Chain Lube penetrates deep into rollers and between link plates. Chain Lube sets to prevent “fling-off,” avoids attraction of dirt, and will not melt under severe use. Chain Lube will not harm rubber, plastic, nylon or paint. For street, off-road and all racing applications!
WD-40 Specialist Motorcycle Chain Lube 14 oz 6 CT, UPC - 0 79567 30031 1
Before use, clean chain first with WD-40® Specialist® Motorcycle Chain Cleaner to remove dirt, oil and grime. Shake can well and apply to the full length of the inside of the chain, allowing the product to run vertically down into the chain parts. Leave to dry.
14 oz Motorcycle Chain Lube
Chain Wax is a high-performance power-spray lubricant for use exclusively on chain-driven vehicles. Its special Parafilm™ formula provides long-term coverage for all chain surfaces, leaving a waxy film appearance. This heavy-duty, water-displacing film provides protection especially in water and high-humidity environments. Chain Wax is formulated with anti-wear and extreme-pressure additives that provide high-performance lubrication for all chains. Chain Wax penetrates deeply, lubricating non-accessible areas, reducing chain stretch and chain wear. Contains no silicone.
WD-40 Specialist Motorcycle Chain Wax 13.5 oz 6 CT, UPC - 0 79567 30032 8
Place motorcycle on center stand so that wheel can rotate freely. Clean chain with WD-40® Specialist® Motorcycle Chain Cleaner to remove dirt, oil and grime. Rotate wheel and spray Chain Wax liberally onto chain, avoiding oversaturation. Allow spray to “set up” for 10 to 15 minutes.
13.5 oz Motorcycle Chain Wax
Total Shine is a high-gloss coating. Its formula dries fast and coats carbon fiber, plastic and vinyl, makes the cleanup process easier by preventing mud and dirt from adhering to the surface. Total Shine dries completely and is water resistant, leaving a long-lasting luster without attracting dirt or dust. Do not use near items ready to be painted.
*Always test on inconspicuous area before use.
WD-40 Specialist Motorcycle Total Shine 12 oz 6 CT, UPC - 0 79567 30033 5
Clean area with WD-40® Specialist® Motorcycle Total Wash. Spray Total Shine directly onto surface. Allow 30 seconds for product to absorb onto the surface and enhance color. With a clean towel, buff the area for a beautiful, dry sheen and long-lasting shine!
12 oz Motorcycle Total Shine
Please review the links available below to see if you can quickly find what you may need on our website:
WD-40 Customer Relations
WD-40 Consumer Relations
P.O. Box 308
Budd Lake, NJ 07828
We welcome you to complete the form below to share any comments/inquiries about WD-40 Company or our website. The information you provide will help us respond to your inquiry as quickly and accurately as possible.